Falco Flash BLE 4.0 4.1

The app provides various functions accessible through different screens:

• Scanner Screen: Displays a list of available Falco eDrives. Users can connect to a selected eDrive by choosing from the list.
• Main Screen:
  • Shows speed in MPH or KPH, battery charge level (with a minimum voltage requirement of 30V).
  • Indicates the total duration of connection between Falco Flash and eDrive.
  • Displays the level of assistance that can be adjusted by swiping up or down on the screen (swipe length must be more than 1 inch). Assistance level can be increased by swiping up and decreased by swiping down.
  • Allows users to connect and disconnect Falco Flash using a single button on the main screen (White button for Start, Blue button for Stop).
  • Enables activation of Emergency Stop by pressing the red-colored button on the main screen, setting the motor power level to -3.
• Setting Screen:
  • Motor ID Setting: Displays connected device ID and allows settings on the Falco eDrive via the app.
  • Device Information: Shows Firmware Number and Turn-On Voltage.
  • CRM Setting: Circumference configuration.
  • Battery Selection.
• eDrive Data Screen: Provides information on various parameters such as Voltage (V), Current (A), Instantaneous Power in iWatts, Battery Capacity (Wh), WH Consumed, WH Remaining, Watt Hour/KM, KM/Miles Range remaining, Temperature/Power Level, and H Sensor Error.
• Torque Sensor Setting: Offers motor control capabilities similar to the PC and MAC versions with the addition of torque sensor adjustments and individual power level settings.
• Power Configurator Screen: Allows Current clamp setting at different power levels through Assist/Regen Mode.